/** * The template for displaying the header * * This is the template that displays all of the section, opens the tag and adds the site's header. * * @package HelloElementor */ if ( ! defined( 'ABSPATH' ) ) { exit; // Exit if accessed directly. } ?> FiberForce - Bio Composants Médicaux

FiberForce

FiberForce

FiberForce

Fiber Force is a wide range of pre-impregnated fiber reinforcements for complete and partial removable dentures.

Three times stronger than metal framework reinforced dentures
Mechanical and chemical adhesion
Lightweight, aesthetic and quick

Dental pratice

Root anchoring

Biolight Plus
Biolight Dual
Biolight ST

Impressing

Splints and bridges

Fast Splint Matrix

Temporary reinforcement

Laboratory

Mobile reinforcement

ALL-ON-4 reinforcement

Splints and bridges

Fast Splint Matrix

Temporary reinforcement

Clinical case
Protocol
Technical data
References
Documents/Bibliography

Clinical Case - Laboratory BDP Dentaire - Paris - January 2020

Jurion Matthieu Pôle BTP Laboratory
60, Diderot Boulevard, 75012 Paris

Trace the limits. Isolate the model

Cut and place the wax plate, then create the rest

Cut the mesh through the plastic film

Put the mesh on the wax

Inject the resin with the mesh in place

Left: intrados view Right: extrados view

Transparent view of the mesh in the framework

Mesh and EZ-vac protocol

Place the self-adhesive wax and pierce holes to create the rests (in accordance with the instructions).

After tracing the model, apply an insulator on the external parts of the tracing.

Place the pink FIBER FORCE mesh on the model

Use the pump to vacuum pack in order to plate the mesh on the model and close the valve

Light cure in a blue light chamber (in accordance with the instructions) and create the denture using your usual technique

Provisional bridge reinforcement protocol

Achieve drainage, apply the pink 0.8mm mesh, followed by the Fiber Force composite

Mill and polish the surface of the bridge

Teeth addition protocol

Achieve drainage, apply the pink 0.8mm mesh, followed by the Fiber Force composite

Mill and polish the added surface

Denture repair protocol

Piece the fracture and pour a relining model

Mill and polish the repaired surface

Mill and polish the repaired surface

For more information

1 box of 2 pink frameworks

80 x 53 mm

References : 08004

1 box of 2 pink meshes

0,8 mm x 150 mm

References : 08001

1 box of 2 pink meshes

2,2 mm x 150 mm

References : 08002

1 box of 2 white meshes

0,8 mm x 150 mm

References : 08003

1 box of 2 white meshes

2,2 mm x 150 mm

References : 08011

1 box of 2 pink UD fibers

2,0 mm x 150 mm

References : 08014

1 box of 2 white UD fibers

2,0 mm x 150 mm

References : 08013

1 box of 2 white bands

2,0 mm x 0,5 mm x 150 mm

References : 08015

1 syringe of pink light curable resin

3ml + cannulas

References : 08027

1 syringe of pink light curable resin

3ml + canules

References : 08028

Overdenture and denture addition kit

1 box of 2 pink frameworks 80×53 mm + 1 box of 2 pink frameworks FREE+ 1 EZ Vac + 2 boxes of 2 pink meshes,
2,2 mm x 150 mm + 1 syringe of pink light curable resin

References : 17001

EZ Vac + Frameworks kit

2 boxes of 2 pink frameworks, 80 x 53 mm + 1 box of 2 pink frameworks FREE+ 1 EZ Vac

References : 17002

1 EZ Vac

Vacuuming system

References : 13002

R&D Article

Spectrum Denturisme

Safety data sheet

Bis-GMA article

Fiber Force notice

Got questions? Need any precision? Contact us: +33 4 76 07 79 57

Got questions? Need any precision? Contact us: +33 4 76 07 79 57

Medical device for dental care reserved for health professionals, not reimbursed by social security. Read carefully the instructions in the leaflet or on the label before use. FiberForce, FiberForce CST, Fast Splint Matrix, Biolight: Class IIA (CE mark issued by SGS) CE1639. CST Link: Class I (CE marking)