/** * The template for displaying the header * * This is the template that displays all of the section, opens the tag and adds the site's header. * * @package HelloElementor */ if ( ! defined( 'ABSPATH' ) ) { exit; // Exit if accessed directly. } ?> FiberForce CST - Bio Composants Médicaux

FiberForce CST

FiberForce CST

FiberForce CST

Fiber implant bar for trans-screwed bridges

Passive and stable
Fast construction

Tridimensional and lightweight structure
Bis-GMA-free and epoxy-free

Dental pratice

Root anchoring

Biolight Plus
Biolight Dual
Biolight ST

Impressing

Splints and bridges

Fast Splint Matrix

Temporary reinforcement

Laboratory

Mobile reinforcement

ALL-ON-4 reinforcement

Splints and bridges

Fast Splint Matrix

Temporary reinforcement

Clinical Case
Protocol
Technical Data
References
Documents/Bibliography

Reinforcement fabrication accordingly

Mounting of the teeth and wax finishing

Negative flasking with the teeth

Pressing the resin in the flask

Taking the framework out of the flask

Relining and polishing of the framework

Adjusting the framework to the model with the denture flange

The framework is screwed on the model

The framework, ready to be placed orally

A mesial or distal extension is required, the cantilevered extension will be of 11 mm, maximum, distally to the last post.

Base reinforcement Start with the hybrid mesh 1:6 (450 mm) from the right tension post (while avoiding the mucous support). Make a round turn knot at the base of the right tension post and briefly light cure.

Orient the reinforcement upward and always restart in tension at the upper level and progress towards the left tension post. Make a round turn knot around the left tension post and light cure as a whole.

The objective is to prevent the acrylic from sliding during offset efforts. Start with the hybrid mesh 1:4 (300 mm) at the base of the tension post with a 45 degree angle, approximately • up to the first implant post.

Reinforcement done

Cantilever extension flexural test:

2 times stronger than PMMA alone

For more information

Fiber Force CST introductory kit: 1 pink hybrid fiber 1:6

1.3 mm, 450 mm + 1 pink hybrid fiber 1:4,
1.2 mm, 300 mm + 3 tension posts + 1 adhesive “James-2” + 1 syringe of pink light curable resin + cannulas

References : 08111

Reassort. Fiber Force CST: 1 pink hybrid fiber 1:6

1.3mm, 450mm + 1 pink hybrid fiber 1:4,
1.2mm, 300mm + 3 tension posts FREE

References : 08112

1 pink hybrid fiber 1:6

1.3 mm, 450 mm

References : 08097

1 pink hybrid fiber 1:4

1.2 mm, 300 mm

References : 08098

3 tension posts

References : 03103

1 syringe of pink light curable resin

3ml + cannulas

References : 08027

Application protocol

Safety data sheet

Bis-GMA article

Instructions of use

Fiber Force CST notice

Got questions? Need any precision? Contact us: +33 4 76 07 79 57

Got questions? Need any precision? Contact us: +33 4 76 07 79 57

Medical device for dental care reserved for health professionals, not reimbursed by social security. Read carefully the instructions in the leaflet or on the label before use. FiberForce, FiberForce CST, Fast Splint Matrix, Biolight: Class IIA (CE mark issued by SGS) CE1639. CST Link: Class I (CE marking)